Копание ввипке
Posted: 2005-05-28 09:32:21
Юзал поиск, и скал в ручную но подходящего скрипта не нашёл, поэтому у меня есть последний шанс чтоб вы помогли переделать скрипт. Он хорош для меня тем что он складывает руду в мешок который в сундуке. - этого скрипта заключаеться втом что он копает всё что видит и не киляет элемов.... Надо чтоб чар переходил к другой точки копания при выкапывании руды от айрона до купера. (Как во всех скриптах Ветера) это я и прошу вавс изменить в моём скрипте... Сам я тоже пытался это сделать... Хотел как лучше а получилось как всегда...
Вот и сам скрипт:
Ну научитесь вы юзать теги!
I'm
[/code]
Вот и сам скрипт:
Code: Select all
#########################
#### GooD VIPMining #####
###### Crafted by #######
#### Coal aka Brona #####
## All rights reserved ##
## Copyright by Guild of Black Sun [GoBS] - DRW##
#########################
sub Mining()
VAR MaxWeight=600 ; vash maksimal'niy ves
VAR UnloadBox='0x4013D973' ; ID containera
VAR UnloadBag='0x4034A24E' ; ID Meshka
VAR Lopata='0x40339433' ; ID kirki&lopati
VAR Timer=0
VAR MyX, MyY, MyZ, i, j
MyX = UO.GetX()
MyY = UO.GetY()
MyZ = UO.GetZ()
ToHide()
Wait(1000)
While NOT UO.Dead()
For i = MyX-4 to MyX+4
For j = MyY-4 to MyY+4
UO.DeleteJournal()
UO.Print("Now Mining In: "+str(MyX-i)+" "+str(MyY-j))
While NOT UO.InJournal("no ore") AND NOT UO.InJournal("far away") AND NOT UO.InJournal("in rock")# AND NOT UO.InJournal("Iron") AND NOT UO.InJournal("Copper") AND NOT UO.InJournal("Bronze") AND NOT UO.InJournal("Rusty") AND NOT UO.InJournal("no line") AND NOT UO.InJournal("Elemental")
CheckLag()
ToHide()
UO.DeleteJournal()
UO.WaitTargetTile("6044", str(i), str(j), str(MyZ))
UO.UseObject(Lopata)
Timer=0
While NOT UO.InJournal("You put") AND NOT UO.InJournal("but fail") AND NOT UO.InJournal("no ore") AND NOT UO.InJournal("far away") AND NOT UO.InJournal("in rock") AND NOT UO.InJournal("no line") AND NOT UO.InJournal("Elemental") AND NOT Timer>=600
Wait(500)
Timer=Timer+1
Wend
If UO.InJournal('Elemental') then
repeat
While NOT UO.Hidden()
UO.DeleteJournal()
UO.Exec('warmode 0')
UO.UseSkill('Stealth')
Repeat
Wait(100)
Until UO.InJournal('You have hidden') OR UO.InJournal('seem to hide') OR UO.InJournal('preoccupied') OR UO.Dead()
Wend
wait(1000)
uo.set("finddistance","22")
uo.ignorereset()
uo.findtype("0x0010","-1","ground")
UO.DeleteJournal()
until NOT uo.findcount()
UO.DeleteJournal()
EndIf
If UO.Weight>MaxWeight then
WalkN(0,0,UnloadBox)
Unload(UnloadBag)
WalkN(MyX,MyY,'')
Endif
Wend
Next
Next
Wend
end sub
sub Unload(UnloadBox)
VAR Exit,i
DIM Ore[4]
Ore[0]='0x19B7' ; 1 ore
Ore[1]='0x19BA' ; 2 ore
Ore[2]='0x19B8' ; 3 ore
Ore[3]='0x19B9' ; 4 and more ore
UO.SetReceivingContainer(UnloadBox)
ToHide()
For i=0 to 3
Exit=0
While Exit<>1
UO.FindType(Ore[i])
If UO.GetQuantity('finditem')>0 then
UO.Grab('all','finditem')
CheckLag()
Wait(1000)
Else
Exit=1
Endif
Wend
Next
UO.UnSetReceivingContainer()
end sub
sub ToHide()
While NOT UO.Hidden()
UO.DeleteJournal()
UO.Exec('warmode 0')
UO.UseSkill('Stealth')
Repeat
Wait(100)
Until UO.InJournal('You have hidden') OR UO.InJournal('seem to hide') OR UO.InJournal('preoccupied') OR UO.Dead()
Wend
end sub
sub CheckLag()
UO.DeleteJournal()
UO.Click('backpack')
repeat
Wait(50)
until UO.InJournal('backpack')
end sub
#================================================= =============
# WalkN(X,Y,Serial) - char is walking by dX and dY step
# sub using Home, End, PgUp, PgDown keys
# d'not rebind this key from default action!
# serial - Serial of target or "" - string
# walkwait - delay after keypress
# Example:
# WalkN(2080,2113,'') - go to coordinates
# WalkN(0,0,'0x12345678') - go to target position
#--------------------------------------------------------------
sub WalkN(x,y,Target)
VAR i,StepSucess
VAR dx,dy,Exit=0
While Exit<>1
ToHide()
If Target<>"" Then
dx=UO.GetX(Target)-UO.GetX()
dy=UO.GetY(Target)-UO.GetY()
UO.Print("Target locked!")
If UO.GetDistance(Target)<2 Then
Exit=1
Endif
Else
dx=x-UO.GetX()
dy=y-UO.GetY()
If dx==0 AND dy==0 Then
Exit=1
Endif
Endif
If dx<>0 AND dy<>0 Then
If dx>0 AND dy>0 Then
StepSucess=Go(3,40,300) ;SE - DownArrow
If StepSucess==-1 Then
StepSucess=Go(7,38,300) ;WN - UpArrow
StepSucess=Go(1,39,300) ;NE - RightArrow
If StepSucess==-1 Then
StepSucess=Go(5,37,300) ;SW - LeftArrow
Endif
Endif
Endif
If dx>0 AND dy<0 Then
StepSucess=Go(1,39,300) ;NE - RightArrow
If StepSucess==-1 Then
StepSucess=Go(5,37,300) ;SW - LeftArrow
StepSucess=Go(3,40,300) ;SE - DownArrow
If StepSucess==-1 Then
StepSucess=Go(7,38,300) ;WN - UpArrow
Endif
Endif
Endif
If dx<0 AND dy>0 Then
StepSucess=Go(5,37,300) ;SW - LeftArrow
If StepSucess==-1 Then
StepSucess=Go(1,39,300) ;NE - RightArrow
StepSucess=Go(7,38,300) ;WN - UpArrow
If StepSucess==-1 Then
StepSucess=Go(3,40,300) ;SE - DownArrow
Endif
Endif
Endif
If dx<0 AND dy<0 Then
StepSucess=Go(7,38,300) ;WN - UpArrow
If StepSucess==-1 Then
StepSucess=Go(3,40,300) ;SE - DownArrow
StepSucess=Go(5,37,300) ;SW - LeftArrow
If StepSucess==-1 Then
StepSucess=Go(1,39,300) ;NE - RightArrow
Endif
Endif
Endif
Endif
If dx<>0 AND dy==0 Then
If dx>0 Then
StepSucess=Go(2,34,300) ;E - PgDown
If StepSucess==-1 Then
StepSucess=Go(3,40,300) ;SE - DownArrow
If StepSucess==-1 Then
StepSucess=Go(1,39,300) ;NE - RightArrow
Endif
StepSucess=Go(2,34,300) ;E - PgDown
Endif
Endif
If dx<0 Then
StepSucess=Go(6,36,300) ;W - Home
If StepSucess==-1 Then
StepSucess=Go(7,38,300) ;WN - UpArrow
If StepSucess==-1 Then
StepSucess=Go(5,37,300) ;SW - LeftArrow
Endif
StepSucess=Go(6,36,300) ;W - Home
Endif
Endif
Endif
If dx==0 AND dy<>0 Then
If dy>0 Then
StepSucess=Go(4,35,300) ;S - End
If StepSucess==-1 Then
StepSucess=Go(3,40,300) ;SE - DownArrow
If StepSucess==-1 Then
StepSucess=Go(5,37,300) ;SW - LeftArrow
Endif
StepSucess=Go(4,35,300) ;S - End
Endif
Endif
If dy<0 Then
StepSucess=Go(0,33,300) ;N - PgUp
If StepSucess==-1 Then
StepSucess=Go(1,39,300) ;NE - RightArrow
If StepSucess==-1 Then
StepSucess=Go(7,38,300) ;WN - UpArrow
Endif
StepSucess=Go(0,33,300) ;N - PgUp
Endif
Endif
Endif
Wend
end sub
sub Go(dir,key,walkwait)
VAR x,y, OldDir
x=UO.GetX()
y=UO.GetY()
OldDir=UO.GetDir()
If UO.GetDir()<>dir Then
UO.Press(key)
wait(walkwait)
If UO.GetDir()<>dir Then
CheckLag()
Endif
Endif
UO.Press(key)
wait(walkwait)
If x==UO.GetX() AND y==UO.GetY() Then
CheckLag()
Endif
If x==UO.GetX() AND y==UO.GetY() AND OldDir<>UO.GetDir() Then
UO.Press(key)
wait(walkwait)
Endif
If x==UO.GetX() AND y==UO.GetY() Then
CheckLag()
Endif
If x==UO.GetX() AND y==UO.GetY() Then
UO.Print("Palevo!")
return -1
Else
return 1
Endif
end sub
#================================================= =============
# Healing() - memoryzed current weapon, bandageself, armed
#--------------------------------------------------------------
sub Healing()
UO.SetArm('CWeapon')
UO.Exec("bandageself")
wait(500)
UO.Arm('CWeapon')
end sub
#================================================= =============
# Recconector
#--------------------------------------------------------------
sub Reconnector()
var ReconnectTime, RFlag
ReconnectTime = '0'
RFlag = 1
Repeat
While (UO.ObjAtLayer('Bpack') == '')
if RFlag Then
ReconnectTime = MakeTime()
RFlag = 0
endif
Wait(20000) # WorldSave Protection
UO.Say('')
Wait(3000)
UO.Say('')
Wait(3000)
UO.Say('')
Wait(3000)
UO.LDblClick(357,164)
UO.LClick(616,459)
Wait(3000)
WEnd
Wait(3000)
if (RFlag == 0) and (ReconnectTime <> '0') Then
;UO.Exec('terminate all')
;UO.Exec('exec autoload')
UO.TextOpen()
UO.TextPrint('Disconnected & Reconnected @ '+ReconnectTime)
RFlag = 1
ReconnectTime = '0'
endif
Until false
end sub
sub MakeTime()
VAR D, T, Ret, i
Ret = STR(UO.Time())
T = ""
For i = 0 To Len(Ret)
T = Ret[Len(Ret)-i] + T
If (I == 2) OR (I == 4) Then
T = ":" + T
EndIf
Next
Ret = STR(UO.Date())
D = ""
For i = 0 To Len(Ret)
D = Ret[Len(Ret)-i] + D
If (I == 2) OR (I == 4) Then
D = "." + D
EndIf
Next
Ret = T + " @ " + D
RETURN Ret
end sub
Code: Select all
Блин неужели это сложно?
[code]
...
I'm
[/code]
поэксперементируй куда 