Yoko

Posted: **2007-09-29 01:14:40**

I have a extreme difficulty with this OnGump system... I don't understand very well how do use that command. If anybody can help me do one simple think I will be very grateful.
I wanna select the 'Blue Button' at the left side of Moonglow text e after that press 'Okay' to go there.

The screen of gump and the gump info is right below:

Code: Select all

_____infogump_______
serial   0x00a3f6a0
gumpid   0x001d4eba
X   0
Y   0
1033   packet size
0   reply packet size
Buttons: ________
 page 0
    1 [   12] image=0x00F8 at 130:345
Checks&Radios: __
 page 0
    1 (*) (_) [    1] image=0x04X at 90:112
    2 (_) (_) [    2] image=0x04X at 90:132
    3 (_) (_) [    3] image=0x04X at 90:152
    4 (_) (_) [    4] image=0x04X at 90:172
    5 (_) (_) [    5] image=0x04X at 90:192
    6 (_) (_) [    6] image=0x04X at 90:212
    7 (_) (_) [    7] image=0x04X at 90:232
    8 (_) (_) [    8] image=0x04X at 90:252
    9 (_) (_) [    9] image=0x04X at 90:272
   10 (_) (_) [   10] image=0x04X at 90:292
   11 (_) (_) [   11] image=0x04X at 90:312
Entryes: ________
All commands: ____
    1] page 0
    2] nodispose
    3] nomove
    4] resizepic 70 50 5054 180 340
    5] resizepic 80 60 3000 160 320
    6] text 90 80 0 0
    7] text 90 90 0 12
    8] text 110 110 0 1
    9] text 110 130 0 2
   10] text 110 150 0 3
   11] text 110 170 0 4
   12] text 110 190 0 5
   13] text 110 210 0 6
   14] text 110 230 0 7
   15] text 110 250 0 8
   16] text 110 270 0 9
   17] text 110 290 0 10
   18] text 110 310 0 11
   19] radio 90 112 1209 1210 1 1
   20] radio 90 132 1209 1210 0 2
   21] radio 90 152 1209 1210 0 3
   22] radio 90 172 1209 1210 0 4
   23] radio 90 192 1209 1210 0 5
   24] radio 90 212 1209 1210 0 6
   25] radio 90 232 1209 1210 0 7
   26] radio 90 252 1209 1210 0 8
   27] radio 90 272 1209 1210 0 9
   28] radio 90 292 1209 1210 0 10
   29] radio 90 312 1209 1210 0 11
   30] button 130 345 247 248 1 0 12
Text: ____________
    0] Escolha seu destino :
    1] Britain
    2] Moonglow
    3] Jehlow
    4] Yew
    5] Minoc
    6] Trinsic
    7] Skara Brae
    8] Magincia
    9] Cove
   10] Serpents Hold (ida)
   11] Bucs Travel (ida)
   12] ----------------

Sorry for anything... IF anybody don't understand my problem is because of my bad english.

[]'s & Thank's!

Posted: **2007-09-29 09:53:23**

Open your gump, click on blue button and print here ,infogump.
As i know you'll able to see in last string reply[000.] or anything else,- last clicked button. So,do it and show it for us.

Posted: **2007-09-29 18:09:19**

This is the infogump when I select the blue button.

Code: Select all

_____infogump_______
serial   0x00a3f6a0
gumpid   0x001d4eba
X   0
Y   0
1033   packet size
0   reply packet size
Buttons: ________
 page 0
    1 [   12] image=0x00F8 at 130:345
Checks&Radios: __
 page 0
    1 (*) (_) [    1] image=0x04X at 90:112
    2 (_) (_) [    2] image=0x04X at 90:132
    3 (_) (_) [    3] image=0x04X at 90:152
    4 (_) (_) [    4] image=0x04X at 90:172
    5 (_) (_) [    5] image=0x04X at 90:192
    6 (_) (_) [    6] image=0x04X at 90:212
    7 (_) (_) [    7] image=0x04X at 90:232
    8 (_) (_) [    8] image=0x04X at 90:252
    9 (_) (_) [    9] image=0x04X at 90:272
   10 (_) (_) [   10] image=0x04X at 90:292
   11 (_) (_) [   11] image=0x04X at 90:312
Entryes: ________
All commands: ____
    1] page 0
    2] nodispose
    3] nomove
    4] resizepic 70 50 5054 180 340
    5] resizepic 80 60 3000 160 320
    6] text 90 80 0 0
    7] text 90 90 0 12
    8] text 110 110 0 1
    9] text 110 130 0 2
   10] text 110 150 0 3
   11] text 110 170 0 4
   12] text 110 190 0 5
   13] text 110 210 0 6
   14] text 110 230 0 7
   15] text 110 250 0 8
   16] text 110 270 0 9
   17] text 110 290 0 10
   18] text 110 310 0 11
   19] radio 90 112 1209 1210 1 1
   20] radio 90 132 1209 1210 0 2
   21] radio 90 152 1209 1210 0 3
   22] radio 90 172 1209 1210 0 4
   23] radio 90 192 1209 1210 0 5
   24] radio 90 212 1209 1210 0 6
   25] radio 90 232 1209 1210 0 7
   26] radio 90 252 1209 1210 0 8
   27] radio 90 272 1209 1210 0 9
   28] radio 90 292 1209 1210 0 10
   29] radio 90 312 1209 1210 0 11
   30] button 130 345 247 248 1 0 12
Text: ____________
    0] Escolha seu destino :
    1] Britain
    2] Moonglow
    3] Jehlow
    4] Yew
    5] Minoc
    6] Trinsic
    7] Skara Brae
    8] Magincia
    9] Cove
   10] Serpents Hold (ida)
   11] Bucs Travel (ida)
   12] ----------------

The infogump don't change...

[]'s

Posted: **2007-09-29 18:17:03**

Code: Select all

sub Go_Go()
  uo.UseObject('input ID of your tp stone')
  uo.Recall('0x028bd576','1')
end sub

I don't know how to make 2 Recall on gump but on of them you can do like i wrote upper, and the second recall you can make by uo.LClick

Posted: **2007-09-29 18:32:39**

This isn't a recall macro, it is a kind of moongate...
On the last post of mine I've put a wrong infogump... ;/

Posted: **2007-09-29 19:39:30**

Command Recall is used not only for recall

. It also can be used for the pushing of button on gump.

Posted: **2007-09-30 01:17:05**

I've tryed the Uo.Recall(). but it don't work... ;///
I don't have no ideia how to use this...
At another Uo assistence it works normaly, but at Injection I don't find an answer for this problem. ;///

[]'s

Posted: **2007-10-01 06:56:30**

там нужно выбрать синюю кнопочку, она подсвечивается, после этого жмёшь ОК, тоесть кнопка на гампе только одна....
похоже без ongump() не обойтись...
только я им пользоваться не умею))..виснет клиент постоянно..

Posted: **2007-10-01 13:15:22**

Ыы..а ничё шо он по-русски походу не разговаривает? =)

Posted: **2007-10-01 13:24:45**

-=JoKeR=- wrote:Ыы..а ничё шо он по-русски походу не разговаривает? =)

так я не ему писал))
я спецам которые хорошо с ongump умеют работать..
подумал, может они не поняли как тот гамп работает...я такие раньше видел

Posted: **2007-10-01 14:27:48**

Не флудите,-отвечайте по теме

*Only russian flood*

Posted: **2007-10-01 23:36:38**

I don't understand russian language... =x

Posted: **2007-10-02 00:10:50**

Code: Select all

OnGump command - autochoice buttons/checks/text in gumps 

Variant1a (repeat exact choice in exact gump): 
   ,ongump repeat 

Variant1b (repeat exact choice in any gump): 
   ,ongump superrepeat 

Variant2 (general form): 
   ,ongump GUMP [CHOICE] 
GUMP: identifyes gump, variants: 
   <serial>|anyserial <gumpid>|anygump      example: anyserial 0x00112233 
   anygump 
   lastgump 
   lastpos 
   pos <x> <y> 
   withtext 'text_part_to_seek'    example: withtext 'Blacksmith' 
   withcommand 'command_part_to_seek'   example: withcommand 'tilepic 60 295 5181' 
CHOICE: identifyes choice you make pressing buttons. 
Consist of 3 parts: 
1) (serial of) button you press to close gump e.g. 'Ok' (default is first button happend) 
   <button_serial>           example: 315 
   (button_number            example: (2 
   [image_serial             example: [0x01 
   lastbutton 
2) (serials of) checks and radios enabled on moment of pressing 1) 
   checks <ID1> <ID2> ...    example: checks 315 316 0x0102 
   checks (num1 (num2 ...    example: checks (1 (3 (8 
   lastchecks 
   nochecks 
3) (texts) what entered in textentry(es) (the same amount as in gump) 
   entryes 'txt1' 'txt2' ... example: entryes 'macrocheck' 
   lastentryes 
   noentryes 
So CHOICE have syntax: 
   [1) [2)] [3)]] 
Examples: 
,ongump repeat 
,ongump any 0x00001234 (1 
,ongump withtext 'Blacksmith' 315 nochecks entryes '10' 
,ongump anygump [0x0123 checks (1 316 entryes '10'

Yoko

Help With OnGump...

Help With OnGump...